Carry on Size.
Rack weight: 6.6 pounds.
Total weight including the Pelican Air 1535: 16 pounds.
Adjustable front and rear rack rails are designed to accommodate a variety of setups. The top two rack rails are not connected allowing you to position each rack rail at a different depth.
Body depth: 10”
The Pelican Air 1535 is foamed out specifically for this fly rack to maximize space while providing proper protection.
Pelican Air 1535 dimensions: 21.96” x 13.97” x 8.98”

T-RACK Specifics:

• Constructed with aircraft-grade aluminum.

• Vents on the top and sides are designed to accommodate Neutrik-D connectors.

• Top aluminum panel is removable to allow additional access to the inside of rack.

• The bottom rack panel is a non-traditional width. A custom rackmount panel with 9 Neutrik D punch-outs is included. This section is intended to mount gear directly to the bottom of the rack. An aluminum bracket to turn the bottom section into traditional half-rack width.

• The bottom of the rack has multiple holes and slots to accommodate iConnectivity interfaces as well as the Apollo Twin in a variety of positions. This section is taller than a standard rack space giving you two full usable rack spaces above the bottom section even with the Apollo Twin mounted inside.

So what fits in this rack?

• While the top two rack spaces are designed for traditional 19" racking, the bottom rack is where this products stands out.

• The bottom section can accommodate two Apollo Twin interfaces mounted side by side or one Apollo Twin and one iConnectivity interface. You cannot mount two iConnectivity interfaces side by side in the bottom section. An aluminum bracket to turn the bottom section into traditional half-rack width.

• The holes and slots in the bottom of the rack for mounting the Apollo Twin and iConnectivity interfaces are positioned for three different recessed depths as well as a variety of left top right configurations.

What’s included?

• T-Rack. This is the actual aluminum frame with rack rails that is in the photos.

• Custom rack panel for the bottom rack with 9 Neutrik-D punch-outs.

• Hardware for mounting the Apollo Twin and iConnectivity interfaces.

• Pelican Air 1535 foamed out for the T-Rack.

• The Apollo Twin and iConnectivity interfaces in the photos are NOT included.

• Aluminum bracket to turn the bottom section into traditional half-rack width.

For international orders, please email info@CircleThreeDesigns.com

In Stock and ready to ship!